Set 120 sigurante auto

Descriere:

Set 120 de sigurante auto.

Valori: 3/5/7,5/10/15/20/25 si 30 A

Cumpara: 60.00 RON Click aici

Geanta pentru bicicleta

Descriere:

Geanta pentru bicicleta.

Dimensiuni: 280x150x120 mm.

Prindere cu scai.

Cumpara: 50.00 RON Click aici

Lupa cu suport si brate de prindere

Descriere:

Lupa cu suport si brate de prindere.

Diametru lupa: 6 cm.

Cumpara: 50.00 RON Click aici

Lupa pentru bijutieri, magnifiere 10x

Descriere:

Lupa pentru bijutieri.

Magnifiere: 10x

Diametru: 3 cm

Cumpara: 30.00 RON Click aici

Manusi ski sau pentru bicicleta material HIPOTEX (marimea 8)

Descriere:


Manusi ski sau pentru bicicleta.

Sunt realizate dintr-un material termoizolant ( HIPOTEX) diferite de manusile de ski obisnuite (cu burete si groase). Se muleaza pe mana. In palma au o portiune cu gel pentru o mai buna aderenta.

Dimeniuni: lungime totala: 25 cm. Latime totala 11 cm. Dimeniuni degeta: intre 6 si 8 cm.

Culoare: negru

Cumpara: 45.00 RON Click aici

Manusi ski sau pentru bicicleta material HIPOTEX (marimea 10)

Descriere:

Manusi ski sau pentru bicicleta.

Sunt realizate dintr-un material termoizolant ( HIPOTEX) diferite de manusile de ski obisnuite (cu burete si groase). Se muleaza pe mana. In palma au o portiune cu gel pentru o mai buna aderenta.

Dimeniuni: lungime totala: 28 cm. Latime totala 12 cm. Dimeniuni degeta: intre 6 si 9 cm.

Culoare: negru cu albastru.

Cumpara: 45.00 RON Click aici

Toc ochelari Reebok

Descriere: 

Toc ochelari Reebok.

Dimensiuni: 18x9.5x7 cm.

Cumpara: 25.00 RON Click aici

Busola tip militar

Cumpara: 45.00 RON Click aici

Trusa accesorii MAKITA (67 piese)

Descriere:


Set accesorii MAKITA.

Setul cuprinde 67 de piese dupa cum urmeaza:

- cate 2 biti PH3/PH2 lungine 25 mm

- cate 1 bit PH0/PH1 lungime 25 mm

- cate 2 biti PZ0/PZ1/PZ2/PZ3 lungime 25 mm

- cate 1 bit tubular 7/6/5/4 lungime 25 mm

- cate 2 biti PH2/PH3 lungime 50 mm

- cate 1 bit PH0/PH1 lungime 50 mm

- cate 2 biti PZ1/PZ2/PZ3 lungime 50 mm

- cate 1 inbus 7/4 mm lungime 25 si 50 mm

- cate un bit TX10/TX15/TX20/TX25 lungime 25 si 50 mm

- tubulare: 5/6/7/8/9/10/11/12/13 mm

- un cap magnetic

- maner surubelnita

- burghie de metal: 3/4/5/6 mm

- burghie lemn: 3/5/6/8 mm

- burghie piatra: 5/6/8 mm

- o ruleta 5m lungime

- un cutter

- un creion

Cumpara: 140.00 RON Click aici

Husa pentru 9 filtre

Descriere:

Husa pentru filtre.

Capacitate: 9 filtre

Culoare: neagra

Diametru maxim pentru filtru: 86 mm

Include loc special pentru carduri de memorie.

Cumpara: 60.00 RON Click aici

Samsung, SD HC card, 32 GB, clasa 10

Cumpara: 130.00 RON Click aici

Geanta pentru camera foto DSLR

Descriere:


Geanta pentru camera foto DSLR.

Dimensiuni: W: 180mm x H: 230mm x D: 110mm

Material exterior: nylon.

Pereti cu burete.

Poza este cea reala. Geanta este incercata pentru un Canon 1000D cu obiectiv standard.

Include si bretea pentru umar.

Cumpara: 60.00 RON Click aici

Husa din neopren pentru obiectiv

Descriere:

Husa din neopren pentru obiectiv.

Rezistenta la apa.

Culoare: neagra.

Dimensiuni: 140 x 95 mm

Cumpara: 33.00 RON Click aici

Card Extreme SDHC, SanDisk, 32 GB , Clasa de viteza 10, 45 Mb/s

Cumpara: 180.00 RON Click aici

Card SDHC, TOSHIBA, 8 GB , Clasa de viteza 10

Cumpara: 45.00 RON Click aici

Card Ultra SDHC, SanDisk, 16 GB , Clasa de viteza 10, 30 Mb/s

Cumpara: 75.00 RON Click aici

Card SDHC, TOSHIBA, 32 GB , Clasa de viteza 10

Cumpara: 115.00 RON Click aici

 Card Ultra SDHC, SanDisk, 32 GB , Clasa de viteza 10, 30 Mb/s

Cumpara: 135.00 RON Click aici

Kit dezvoltare ATmega128

Descriere:


Kit dezvoltare Atmega128.

Pachetul contine: placa de dezvoltare cu microcontroller Atmega128, display grafic, breadboard, cablu USB, telecomanda, fire testare, accesorii (potentiometru, butoane, rezistente, led-uri.)

Cmpara: 211.00 RON Click aici

Programator PIC, AD-PIC02

Descriere:

Programator serial pentru microcontrolore PIC.

Familie suportata: PIC16F84A, PIC16F870-72-73, PIC16F876

Memorii suportate: 24C01-24C256

Pachetul include: programatorul, CD si schema

Cumpara: 32.00 RON Click aici

Placa de dezvoltare Funduino Mega 2560 ATmega2560-16AU

Microcontroller ATmega2560
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 54 (of which 14 provide PWM output)
Analog Input Pins 16
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 256 KB of which 8 KB used by bootloader
SRAM 8 KB
EEPROM 4 KB
Clock Speed 16 MHz



Cumpara: 100.00 RON Click aici

Modul emitator/receptor wireless

Descriere:


Brand new and high quality.
Suitable for Bluetooth adapter, Bluetooth phone use, master-slave can also be used in double.
Can be set for the module control parameters and control commands issued via AT commands.
Provide 7 input and output ports, scalable user IO resources.
Work status indicators; connection with the non-connection state signal output, easy to track the status of module MCU.
Great for embedded wireless serial transmission alternatives.
Bluetooth Specification v2.0+EDR.
USB protocol: USB v1.1/2.0.
Frequency: 2.4GHz ISM band.
Modulation: GFSK(Gaussian Frequency Shift Keying).
Transmit power: not more than 4dBm, Class 2.
Sensitivity: not more than -84dBm at 0.1% BER.
Rate: Asynchronous: 2.1Mbps(Max) / 160 kbps.
Synchronous: 1Mbps/1Mbps.
Security features: Authentication and encryption.
Support profiles: Bluetooth serial port (master & slave).
Power Supply: +3.3VDC 50mA.
Working temperature: –5°C to 45°C.
Max. serial baud rate: 1382400bps, support for hardware flow control transfer.
Size:2.7cm x 1.3cm - 1.06inch x 0.51inch.

Documentatie: Click aici

Cumpara: 35.00 RON Click aici

Set 10 fire de testare

Descriere:

10PCS（10 root） Dupont wire 20cm cable Line color 1p-1p pin connector

Cumpara: 15.00 RON Click aici

Modul releu cu 2 canale

Descriere:

This is a 2 Channel 5V Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) . 

1. 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current 
2. Equiped with high-current relay, AC250V 10A ; DC30V 10A 
3. Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

Cumpara: 22.00 RON Click aici

Modul adaptor SD card

Descriere:


1.This SD Card module can make your SD application more easier and simple.
2.It is easily interfaced as a peripheral to your arduino sensor shield module.
3.Through programming, you can read and write to the SD card using your arduino.
A.Can be used for SD Card more eaisly, such as for MP3 Player, MCU/ARM system control.
B. All SD SPI pins output, MOSI, SCK, MISO and CS.
C. Support 5V/3.3V input

Package Content

1 X NEW SD Card Module Slot Socket Reader for Arduino ARM MCU

Documentatie: Click aici

Cumpara: 18.00 RON Click aici

Emitator/receptor radio 433 MHz

Descriere:

TX Technical Specifications:

Receiver module parameters

1.Product Model: MX-05V

2.Operating voltage: DC5V

3.Quiescent Current: 4MA

4.Receiving frequency: 433.92MHZ

5.Receiver sensitivity:-105DB

6.Size: 30 * 14 * 7mm

7.External antenna: 32CM single core wire, wound into a spiral

Technical parameters of the transmitter head

1.Product Model: MX-FS-03V

2.Launch distance :20-200 meters (different voltage, different results)

3.Operating voltage :3.5-12V

4.Dimensions: 19 * 19mm

5.Operating mode: AM

6.Transfer rate: 4KB / S

7.Transmitting power: 10mW

8.Transmitting frequency: 433M

9.An external antenna: 25cm ordinary multi-core or single-core line

10.Pinout from left → right: (DATA; VCC; GND)

Application environment

Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains, alarm host, alarm, remote control motorcycle remote control electric cars, remote control MP3.

Remark

1.VCC voltage module operating voltage and good power filtering;

2.Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor, the length of the antenna 433M of about 17cm;

3.Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high pressure, and interference source; frequency used to receive, decode and oscillation resistor should match with the transmitter.

Documentatie: Click aici

Exemplu cod: Click aici

Cumpara: 17.00 RON Click aici

Senzor de proximitate cu infrarosu:

The Adjustable Infrared Sensor Switch is a set of transmitter and receiver in one of the photoelectric switch sensor. The detection distance can be adjusted according to the demand. The sensor has a detection range of 3cm-80cm. The switching signal output differs in accordance to the obstacles. It remains high when no obstacles and remains low when there are obstacles.

It is small, easy to use/assemble, inexpensive. Useful for robot, interactive media, industrial assembly line, etc.

Specification

Power supply: 5V

Current:100mA

Range:3-80cm adjustable

Red: +5V; Yellow:Signal;Green:GND

Cumpara: 38.00 RON Click aici

Modul senzor accelerometru (MMA7361)

Descriere:


1, On-board MMA7361(replace MMA7260),low cost,micro capacitive acceleration sensor;

2, Support 5V/3.3V voltage input,on-board RT9161, has much lower pressure drop and much

faster load corresponding speed than 1117,very suitable for high noise power environment;

3, Range is chosen by MCU IO,or resistance;

4, Common pins have been drawn forth,inserted pins are standard 100mil(2.54mm),convenient for dot matrix board;

5, Dormancy enable can be controlled by MCU IO;

6, PCB board is gold-plated both sides,size: 27.9(mm)x16.8(mm)

7, Schematic diagram,test program and related materials are provided after purchase.

Cumpara: 26.00 RON Click aici

Documentatie: Click aici

Senzor detectie miscare cu infrarosu (PIR)

Descriere:

Probe LHI778, high sensitivity.

Technical parameters:
1.Operating voltage: DC5V to 20V
2.Static power consumption: 65 microamps
3.Level output: 3.3V, low 0V
4.Delay time: adjustable (0.3 seconds to 18 seconds)
5.Blockade Time: 0.2 seconds
6.Trigger Mode: L can not be repeated, H can be repeated default value H
7.Sensing range: less than 120 degree cone angle of less than 7 meters
8.Operating temperature: -15 to +70 degrees
9.PCB Dimensions: 32 * 24mm, screw hole distance 28mm, screw aperture 2mm sensor lens size: (diameter): 23mm (default)

Features:
1. automatic induction: when someone enters its sensing range input high, people leave the sensor range automatic delay off high. Output low.

2. photosensitive control (optional): module is reserved for the location, you can set the photosensitive control, daytime or light sensing. The photosensitive Control optional features not installed at the factory photoresistor. If necessary, please purchase separately photoresistor install it yourself.

3. two trigger modes: L can not be repeated, H can be repeated. Jumper selectable, default is H.

A. not repeat the trigger mode: the sensor output high, the delay time has elapsed, the output automatically from high to low.
B. repeatable trigger mode: the sensor output high, the delay period, if human activities within its sensing range, the output will always remain high until people leave only delay the high level goes low (sensor module detected after every activity of the body's automatic postponed a delay period of time, and the last time activities as the starting point of the delay time).

4. induced blockade time (default setting: 0.2 seconds): sensing module in every sensor output (high to low) followed by set up a blockade of the time, in this period of time the sensor is not receiving any induction signal. This feature can be achieved both of the (inductive output time and the blocking time) interval can be applied to the interval detection products; This feature can effectively suppress the various interference generated in the process of load switching.
5. wide operating voltage range: default Voltage DC5V to 20V

6. micro-power: quiescent current of 65 microamps, particularly suitable for battery-powered electrical products.

7. output high signal: easy to achieve docking with the various types of circuits.

Applications:
Pyroelectric infrared switch is a passive infrared switches BISS0001 accompanied pyroelectric infrared sensor and a small amount of external components. Can automatically and quickly turned on all types of incandescent lamps, fluorescent lamps, buzzer, automatic doors, electric fans, dryer and automatic washing machines and other devices, is a kind of high-tech products. Especially suitable for enterprises, hotels, shopping malls, warehouses and family aisles, corridors and other sensitive areas, or for the security zone, automatic lighting, lighting and alarm systems.
■ Security Products ■ human induction toys
■ body induction lamps ■ industrial automation control, etc.

Instructions for use:
1. Sensing module is powered initialization time of about one minute, during which the module will output 0-3 times the interval, one minute after entering standby.
2. Should avoid lights and other sources of interference the a close direct module surface of the lens, in order to avoid the introduction of the interference signal malfunction; using the environment as much as possible to avoid the flow of the wind, the wind will cause interference sensor.
3. Sensing module uses dual probe, the probe window is rectangular, dual (A $ B $) in the long direction at both ends, from left to right or from right to left when the body is walked by infrared spectroscopy reach the dual time, distance difference, the greater the difference, the more sensitive the induction, when the human body from the front to the probe or from top to bottom or from the bottom to the previous direction came dual detection distance of less than infrared spectroscopy, no difference value, the sensor should be installed up to the direction of the probe dual direction with human activities as parallel as possible to ensure that the human body has been passed by the probe dual induction sensor insensitive or does not work; Round lens in order to increase the sensing range of angles, the module also makes the probe surrounded induction, but the left and right sides still up and down both directions sensing range and sensitivity, still need to try to install the above requirements.

Cumpara: 19,00 RON Click aici

Documentatie: Click aici

Senzor de culoare TCS 230.

Descriere:

Chip: TCS230

Input voltage: DC 3 ~ 5V

Output frequency voltage: 0 ~ 5V

Use bright white LED lights

Can be connected directly with Microcontroller

Static detection of the measured object color

Best detection distance: 10mm

PCB size: 31.6 (mm) x24.4 (mm)

Documentatie: Click aici

Cumpara: 41,00 RON. Click aici